*
 *
 * 		 *
 *
 *
 
 
    Click here to read terms and conditions
Add Announcement Here
Page: 1

T1000 firmware upgrade procedure

The Permalink allows you to share this Post with Friends and other Users. To use, click the Permalink and then copy the URL from your Browsers Adress Bar.#1  Permalink    Top 16-May-11 11:28:56

T1000 firmware upgrade procedure

Download compressed file from the link below and extract content to a new folder and follow the instruction.

Click here to download

1. Copy BESTECH folder to USB flash drive.
2. Switch off unit using the main switch on the back of unit.
3. Connect USB flash drive to unit.
4. Switch on unit.
5. Unit will start firmware upgrade automatically.
6. Front panel will display with r r r r.
7. Front panel will then display with numbers 0000, 1111, 2222…etc.
8. When front panel display with d d d d, switch off unit using the main switch on back of unit.
9. Remove USB flash drive from unit.
10. Disconnect unit from power point for 15 seconds.
11. Switch on unit again.
12. Reset unit and scan all channels again (MENU - > SYSTEM - > Default). The default PIN is 0000. Then follow on-screen instruction to set up unit again.

Lambert Fung
Just a usual guy
useravatar
Offline
120 Posts
Administrator has disabled public posting
The Permalink allows you to share this Post with Friends and other Users. To use, click the Permalink and then copy the URL from your Browsers Adress Bar.#2  Permalink    Top 22-Feb-12 16:49:47

Re: T1000 firmware upgrade procedure

Is this the latest upgrade for the T1000 firmware?
Have followed these instructions but the unit does not respond to the usb.

John Gear
useravatar
Offline
1 Posts
Administrator has disabled public posting
The Permalink allows you to share this Post with Friends and other Users. To use, click the Permalink and then copy the URL from your Browsers Adress Bar.#3  Permalink    Top 23-Feb-12 11:17:26

Re: T1000 firmware upgrade procedure

Hi John,

This is the latest firmware for T1000.
Are you referring to the firmware upgrade procedure or the general use of USB flash drive on the T1000?
If you are referring to the upgrade procedure, please make sure you copy the whole BESTECH folder(including the folder itself) not just the content of the folder to the USB flash drive. The unit will need to look for the BESTECH folder during the upgrade. If possible, backup the content of your USB flash drive and format the USB flash drive. Clear all files on the USB flash drive before copying the BESTECH folder to it. Switch off the T1000 using the main switch on the back of the unit and insert the USB flash drive. Then switch on the unit again. This will force the T1000 to search for the USB flash drive.

Lambert Fung
Just a usual guy
useravatar
Offline
120 Posts
Administrator has disabled public posting
The Permalink allows you to share this Post with Friends and other Users. To use, click the Permalink and then copy the URL from your Browsers Adress Bar.#4  Permalink    Top 13-May-12 04:16:16

Re: T1000 firmware upgrade procedure

Is this going to delete all the media I have stored on the HDD of the PVR?

Philip Murphy
useravatar
Offline
3 Posts
Administrator has disabled public posting
Page: 1